Surface Scanning Laser Confocal Displacement Meter

LT-9000 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Confocal Displacement Sensor - CL-3000 series

Sensor Head, Not Subject to Export Control, with Camera Function LT-9031M

LT-9031M - Sensor Head, Not Subject to Export Control, with Camera Function

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model			LT-9031M
Type			Long-range
Measurement range			±1.0 mm ±0.04"
Reference distance			30 mm 1.18"
Light source	Type		Red semiconductor laser
	Wavelength		655 nm
	Output		170 µW (IEC 60825-1) /3.0 µW (FDA (CDRH) Part 1040.10)
	Laser Class		Class IIa Laser Product (FDA (CDRH) Part 1040.10) Class 1 Laser Product (IEC 60825-1)
	Spot diameter		Approx. ø7 µm ø0.000276"
Scan width/interval			0 to 560 µm 0 to 0.022" (6 steps)/ 1 to 8 µm 0.000039 to 0.000315" (4 steps)
Resolution			0.3 µm 0.000012"^*1
Linearity			±0.3% of F.S.^*1
Sampling cycle			640 µs to 187 ms (14 steps)^*2
Display	Minimumdisplayable unit		0.1 µm ^*3
	Display range		±9999.99 µm
	Microscopefunction		Available
	Display cycle		10 times/sec.^*4
Terminal block	Analog output		±10 V x 2 outputs, output impedance: 100 Ω
	Timing input		Non-voltage input
	Reset input
	Auto-zero input
	Monitor dedicated power supply		24 VDC^*5
Control I/O	Judgment mode	3-step limits output	For OUT1 and OUT2, and NPN open collector output^*6
	Binary mode	Binary output	Measured data output (21 bits), OUT1/OUT2/PROFILE selectable NPN open collector output^*6
		Strobe output	NPN open collector output^*6
		Binary selector output
		Binary selection input	Non-voltage input^*6
	Stability output		NPN open collector output
	Laser remote input		Non-voltage input
	Program switching input		Non-voltage input x 3 inputs
RS-232C interface			Measured data output and control I/O (Selectable up to baud rate 115200 bps.)
Video output			NTSC compliant (PIN connector)
Microscopefunction	Function presence/absence		Kompatibel
Microscope function	Field of view		2.5 mm x 2.0 mm 0.10" x 0.08"
	Type		Available
	Illumination light source		Infrared LED (wavelength: 870 nm)
Main functions	Displacement mode		Distance measurement, Transparent object thickness measurement, Surface selection, Dark-out, Mask, Trend graph display, and Scan width/interval change^*7
	Profile mode		–^*7
	Common		Light intensity accumulation, Microscope (LT-9501H, LT-9501HSO (5654) only), Tolerance judgment, 8-program registration, Calibration, Averaging, Hold modes, Auto-zero, and interface language selection
Temperature characteristics (20 to 30°C (68 to 86°F))			±0.25% of F.S.
Rating	Power voltage		100 to 240 VAC ±10 %, 50/60 Hz
	Power consumption		110VA or less
Environmental resistance	Pollution degree		2
	Overvoltage category		II
	Ambient light		Incandescent lamp/Fluorescent lamp: 10,000 lux max.
	Ambient temperature		0 to +35 °C 32 to 95 °F
	Relative humidity		35 to 85 % RH (No condensation)
Weight			Approx. 500 g
^1 The value when the measurement target is a mirrored surface object measured in displacement mode, scan width/interval 120 µm 0.004725"/2 µm 0.000079", and 8-times average ^2 Sampling cycle differs according to the manufacturing variation of individual measuring units. The value when the FINE mode is set to OFF. ^3 Display changes every ±0.3 µm. ^4 Varies depending on the setting ^5 Dedicated power supply for the monitor specified by KEYENCE. ^6 Select either the Limits mode or the Binary mode. ^*7 Select either the Distance mode or the Profile mode. （Distance mode is only available with the LT-9501HSO (5654) and LT-9001HSO (5655).） The rating of the NPN open-collector output is 30 mA (30 V or lower) maximum, and residual voltage is 0.5 V. The rating of the Non-voltage input is ON voltage 1 V or lower, and OFF current 0.6 mA or lower.

Data Sheet (PDF) Other Models